{"title":"Boards \u0026 Computers","description":"\u003cp\u003eMicrocontrollers and single-board computers — the brain of every build.\u003c\/p\u003e","products":[{"product_id":"esp32-cam-camera-development","title":"ESP32-CAM Camera Development Board, Wi-Fi + Bluetooth, OV2640","description":"\u003cp\u003eThe ESP32-CAM is a tiny development board that combines an ESP32 Wi-Fi and Bluetooth chip with a camera, a TF card slot and a flash LED. At just 27 x 40.5 x 4.5mm, this ESP32 camera board is a low-cost base for wireless monitoring, smart home cameras, QR code reading and other IoT projects.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e802.11 b\/g\/n Wi-Fi plus Bluetooth and BLE\u003c\/li\u003e\n\u003cli\u003eDual-core 32-bit CPU up to 240MHz with 520KB SRAM and 4MB external PSRAM\u003c\/li\u003e\n\u003cli\u003eOV2640 camera included, with built-in flash; also supports the OV7670 (sold separately)\u003c\/li\u003e\n\u003cli\u003eUpload images over Wi-Fi and save to a TF card\u003c\/li\u003e\n\u003cli\u003eUART, SPI, I2C, PWM, ADC and DAC interfaces\u003c\/li\u003e\n\u003cli\u003eStation, access point or both; serial and over-the-air (FOTA) firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 802.11 b\/g\/n Wi-Fi, Bluetooth\/BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPU:\u003c\/strong\u003e Dual-core 32-bit, up to 240MHz, 600 DMIPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 520KB SRAM, 4MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e OV2640 (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e TF card slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep sleep current:\u003c\/strong\u003e As low as 6mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 27 x 40.5 x 4.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e Embedded lwIP and FreeRTOS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESP32-CAM board\u003c\/li\u003e\n\u003cli\u003eOV2640 camera module\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOnly the OV2640 camera is included; the OV7670 must be bought separately. Browse more boards in our \u003ca href=\"\/collections\/esp32-iot\"\u003eESP32 and IoT collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Elyvora LLC","offers":[{"title":"ESP32","offer_id":67993814630505,"sku":"CJJSWLWL00012-ESP32-CAM+OV2640 module","price":11.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/689439710838.jpg?v=1793993484"},{"product_id":"raspberry-pi-5","title":"Raspberry Pi 5","description":"\u003cp\u003eRaspberry Pi 5 is the fastest Raspberry Pi single-board computer yet: a 2.4GHz quad-core Arm Cortex-A76 processor, dual 4K HDMI output and a PCIe interface for fast storage, on the familiar credit-card-sized board. Use it as a compact desktop, a home server, a media player or the brain of your next project, and choose 1GB, 2GB, 4GB, 8GB or 16GB of RAM.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.4GHz quad-core 64-bit Arm Cortex-A76 CPU with cryptography extensions\u003c\/li\u003e\n\u003cli\u003eVideoCore VII GPU and dual 4Kp60 HDMI output with HDR support\u003c\/li\u003e\n\u003cli\u003ePCIe 2.0 x1 interface for NVMe SSDs and other fast peripherals (adapter such as the M.2 HAT+ required)\u003c\/li\u003e\n\u003cli\u003eTwo USB 3.0 ports with simultaneous 5Gbps operation, plus two USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003eBuilt-in real-time clock and a power button\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e 2.4GHz quad-core 64-bit Arm Cortex-A76, 512KB L2 per core, 2MB shared L3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPU:\u003c\/strong\u003e VideoCore VII, OpenGL ES 3.1, Vulkan 1.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e dual 4Kp60 HDMI with HDR, 4Kp60 HEVC decoder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e LPDDR4X-4267 SDRAM, 1GB \/ 2GB \/ 4GB \/ 8GB \/ 16GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e dual-band 802.11ac Wi-Fi, Bluetooth 5.0 \/ BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetworking:\u003c\/strong\u003e Gigabit Ethernet with PoE+ support (requires the Pi 5 PoE+ HAT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e microSD slot with high-speed SDR104 mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera\/display:\u003c\/strong\u003e 2x 4-lane MIPI transceivers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO:\u003c\/strong\u003e standard 40-pin header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V\/5A DC via USB-C with Power Delivery support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC:\u003c\/strong\u003e real-time clock, powered by an external battery (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x Raspberry Pi 5 board. Power supply, microSD card, case and cables are not included.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eFor full USB power, use the official 27W USB-C power supply; a lower-rated supply works but limits current to USB devices. Existing 40-pin HATs are expected to work as before. New to it? Follow our \u003ca href=\"\/blogs\/tutorials\/raspberry-pi-5-getting-started\"\u003eRaspberry Pi 5 setup guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"1GB","offer_id":67994073432169,"sku":"SC2162","price":45.0,"currency_code":"USD","in_stock":false},{"title":"2GB","offer_id":67994073464937,"sku":"SC1642","price":77.5,"currency_code":"USD","in_stock":false},{"title":"4GB","offer_id":67994073497705,"sku":"SC1431","price":110.0,"currency_code":"USD","in_stock":false},{"title":"8GB","offer_id":67994073530473,"sku":"SC1432","price":175.0,"currency_code":"USD","in_stock":false},{"title":"16GB","offer_id":67994073563241,"sku":"SC1113","price":385.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/PI_5_HERO__22442.1756108800.webp?v=1794000249"},{"product_id":"raspberry-pi-500","title":"Raspberry Pi 500","description":"\u003cp\u003eRaspberry Pi 500 puts a complete computer inside a compact keyboard, using the same quad-core Arm processor and RP1 I\/O controller as Raspberry Pi 5, backed by 8GB of RAM. This keyboard computer is a tidy setup for learning, coding and everyday desktop work, and a one-piece aluminum heatsink inside keeps it running smoothly under load. Buy the unit on its own or as the Desktop Kit.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.4GHz quad-core Arm Cortex-A76 CPU with 8GB LPDDR4X RAM\u003c\/li\u003e\n\u003cli\u003eTwo micro HDMI ports for up to two 4Kp60 displays\u003c\/li\u003e\n\u003cli\u003eDual-band Wi-Fi, Bluetooth 5.0 and Gigabit Ethernet built in\u003c\/li\u003e\n\u003cli\u003eHorizontal 40-pin GPIO header on the back for electronics projects\u003c\/li\u003e\n\u003cli\u003ePower button that works the same way as the one on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eIncludes a 32GB A2-class microSD card preloaded with Raspberry Pi OS\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 8GB LPDDR4X-4267 SDRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Dual-band 2.4GHz\/5GHz 802.11b\/g\/n\/ac, Bluetooth 5.0, BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 2 × USB 3.0, 1 × USB 2.0, Gigabit Ethernet, 2 × micro HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultimedia:\u003c\/strong\u003e H.265 4Kp60 decode, OpenGL ES 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyboard:\u003c\/strong\u003e 78-, 79- or 83-key compact layout, depending on region\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V DC via USB connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 286 × 122 × 23mm (maximum)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2034\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUnit only: Raspberry Pi 500 with a 32GB microSD card (Raspberry Pi OS installed); power supply, micro HDMI cable, mouse and monitor not included\u003c\/li\u003e\n\u003cli\u003eDesktop Kit: Raspberry Pi 500 plus a mouse, USB-C power supply, HDMI cable and the Official Raspberry Pi Beginner's Guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the rest of the \u003ca href=\"\/collections\/official-raspberry-pi\"\u003eofficial Raspberry Pi range\u003c\/a\u003e for monitors and accessories.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Unit only","offer_id":67994073596009,"sku":"SC1231","price":180.0,"currency_code":"USD","in_stock":false},{"title":"Desktop kit","offer_id":67994073628777,"sku":null,"price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/pi500_UO__53956.1756662919.webp?v=1794000251"},{"product_id":"raspberry-pi-500-plus","title":"Raspberry Pi 500+","description":"\u003cp\u003eRaspberry Pi 500+ is the premium version of the Raspberry Pi keyboard computer: a Raspberry Pi 5 class processor with 16GB of RAM and a 256GB Raspberry Pi SSD, built into a low-profile mechanical keyboard. It suits power users who want a compact, clicky desktop with fast NVMe storage. Choose the unit on its own or the Desktop Kit.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.4GHz quad-core Arm Cortex-A76 CPU, the same as Raspberry Pi 5, with 16GB LPDDR4X RAM\u003c\/li\u003e\n\u003cli\u003e256GB Raspberry Pi SSD preinstalled with Raspberry Pi OS; the M.2 slot takes NVMe drives up to 2280 size\u003c\/li\u003e\n\u003cli\u003eGateron KS-33 Blue low-profile mechanical switches with interchangeable keycaps\u003c\/li\u003e\n\u003cli\u003eIndividually addressable, programmable RGB backlighting\u003c\/li\u003e\n\u003cli\u003eOne-piece aluminum heatsink and dual 4Kp60 display output\u003c\/li\u003e\n\u003cli\u003eTools included for opening the case to swap the SSD or keycaps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 16GB LPDDR4X-4267 SDRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 256GB Raspberry Pi SSD, M.2 NVMe up to 2280, plus microSD slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Dual-band 802.11b\/g\/n\/ac Wi-Fi, Bluetooth 5.0, BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 2 × USB 3.0, 1 × USB 2.0, Gigabit Ethernet, 2 × micro HDMI, 40-pin GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyboard:\u003c\/strong\u003e 84-, 85- or 88-key mechanical, depending on region\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V DC via USB connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 312 × 123.06 × 35.76mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2035\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUnit only: Raspberry Pi 500+ with opening tools; power supply not included\u003c\/li\u003e\n\u003cli\u003eDesktop Kit: Raspberry Pi 500+ plus a mouse, USB-C power supply, HDMI cable and the Official Raspberry Pi Beginner's Guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eRaspberry Pi 500+ is longer and taller than Raspberry Pi 500, so most sleeves made for Pi 400 or Pi 500 won't fit. The switches are clicky, so expect an audible keyboard.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Unit only","offer_id":67994073661545,"sku":"SC1237","price":430.0,"currency_code":"USD","in_stock":false},{"title":"Desktop kit","offer_id":67994073694313,"sku":null,"price":430.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/Pi_500_-top-colour__90620.1758782163.webp?v=1794000253"},{"product_id":"raspberry-pi-4-model-b","title":"Raspberry Pi 4 Model B","description":"\u003cp\u003eRaspberry Pi 4 Model B is a quad-core single-board computer with dual 4K display output, USB 3.0 and Gigabit Ethernet. It's a dependable choice for a dual-monitor desktop, media center, NAS, game emulator or small home server, and it keeps the standard 40-pin GPIO header for HATs and electronics. Choose 1GB, 2GB, 4GB or 8GB of RAM.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1.5GHz 64-bit quad-core CPU, around three times the performance of the previous model\u003c\/li\u003e\n\u003cli\u003eTwo micro HDMI ports with support for up to 4Kp60\u003c\/li\u003e\n\u003cli\u003eDual-band 802.11ac Wi-Fi, Bluetooth 5.0 and Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eTwo USB 3.0 and two USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003e2-lane MIPI DSI display and MIPI CSI camera connectors\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet capable with a separate PoE HAT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPU:\u003c\/strong\u003e 1.5GHz 64-bit quad-core\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e LPDDR4, 1GB, 2GB, 4GB or 8GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4GHz\/5GHz 802.11ac, Bluetooth 5.0, BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO:\u003c\/strong\u003e Standard 40-pin header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultimedia:\u003c\/strong\u003e H.265 4Kp60 decode; H.264 1080p60 decode, 1080p30 encode; OpenGL ES 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio\/video:\u003c\/strong\u003e 4-pole stereo audio and composite video port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e microSD card slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V DC via USB-C or GPIO header, minimum 3A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi 4 Model B board\u003c\/li\u003e\n\u003cli\u003ePower supply, microSD card and case sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePut it to work as a network appliance: \u003ca href=\"\/blogs\/tutorials\/raspberry-pi-wireguard-vpn\"\u003ebuild a home VPN with WireGuard\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"1GB","offer_id":67994073727081,"sku":"SC0192","price":35.0,"currency_code":"USD","in_stock":false},{"title":"2GB","offer_id":67994073759849,"sku":"SC0193","price":67.5,"currency_code":"USD","in_stock":false},{"title":"4GB","offer_id":67994073792617,"sku":"SC0194","price":100.0,"currency_code":"USD","in_stock":false},{"title":"8GB","offer_id":67994073825385,"sku":"SC0195","price":165.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/raspberry-pi-4-model-b.jpg?v=1794000255"},{"product_id":"raspberry-pi-400","title":"Raspberry Pi 400 Personal Computer Kit","description":"\u003cp\u003eRaspberry Pi 400 is a complete personal computer built into a compact keyboard, with a quad-core 64-bit processor, 4GB of RAM, wireless networking and dual-display output. It's an easy way to learn to code in the Raspberry Pi OS desktop, and it handles web browsing, documents and video too. The 40-pin GPIO header at the back keeps it ready for electronics projects.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBroadcom BCM2711 quad-core Cortex-A72 at 1.8GHz, cooled by a large internal heatsink\u003c\/li\u003e\n\u003cli\u003e4GB LPDDR4-3200 RAM\u003c\/li\u003e\n\u003cli\u003eDual-band Wi-Fi, Bluetooth 5.0 and Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eTwo micro HDMI ports (up to 4Kp60) for one or two displays\u003c\/li\u003e\n\u003cli\u003eHorizontal 40-pin GPIO header on the rear edge\u003c\/li\u003e\n\u003cli\u003eF10 key doubles as a power button; security lock port built in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Broadcom BCM2711, quad-core Cortex-A72 (Arm v8) 64-bit @ 1.8GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 4GB LPDDR4-3200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts:\u003c\/strong\u003e 2 × USB 3.0, 1 × USB 2.0, Gigabit Ethernet, 2 × micro HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultimedia:\u003c\/strong\u003e H.265 4Kp60 decode; H.264 1080p60 decode, 1080p30 encode; OpenGL ES 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e microSD card slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyboard:\u003c\/strong\u003e 78- or 79-key compact layout, depending on region\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V DC via USB-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 286 × 122 × 23mm (maximum)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eRaspberry Pi 400 connects to monitors over micro HDMI. It has no CSI camera or DSI display connector, so ribbon-cable camera modules and DSI touchscreens can't be attached; use a USB camera for camera projects.\u003c\/p\u003e\u003cp\u003eLooking for project ideas? Browse our \u003ca href=\"\/pages\/tutorials\"\u003eRaspberry Pi tutorials\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994073858153,"sku":"SC0373SD","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/Pi400_Kit_0__40241.1604063414.jpg?v=1794000257"},{"product_id":"raspberry-pi-zero-2-w","title":"Raspberry Pi Zero 2 W","description":"\u003cp\u003eRaspberry Pi Zero 2 W packs a quad-core 64-bit processor, Wi-Fi and Bluetooth onto a 65 × 30mm board. It keeps the Zero W's form factor, connectors and mounting holes, so it slots straight into existing Zero projects, and it's a good fit for small always-on builds. Choose a bare board or one with a pre-soldered GPIO header.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuad-core 64-bit Arm Cortex-A53 at 1GHz in the RP3A0 system-in-package, with 512MB LPDDR2\u003c\/li\u003e\n\u003cli\u003eAbout five times the multi-threaded performance of the single-core Zero W, and 40% more single-threaded\u003c\/li\u003e\n\u003cli\u003e2.4GHz 802.11b\/g\/n Wi-Fi, Bluetooth 4.2 and BLE with an onboard antenna\u003c\/li\u003e\n\u003cli\u003eMini HDMI, USB 2.0 OTG, microSD slot and CSI-2 camera connector\u003c\/li\u003e\n\u003cli\u003eHAT-compatible 40-pin header footprint, bare or pre-soldered depending on the version you pick\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Broadcom BCM2710A1, quad-core 64-bit Arm Cortex-A53 @ 1GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 512MB LPDDR2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e Mini HDMI; composite via test points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultimedia:\u003c\/strong\u003e H.264 and MPEG-4 decode at 1080p30, H.264 encode at 1080p30, OpenGL ES 1.1 and 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e 5V DC 2.5A via micro USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 65 × 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20°C to +70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi Zero 2 W board (with or without headers)\u003c\/li\u003e\n\u003cli\u003eNo cables or adapters included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA popular first project: \u003ca href=\"\/blogs\/tutorials\/raspberry-pi-pi-hole-ad-blocker\"\u003eset up a Pi-hole network ad blocker\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"No headers","offer_id":67994073890921,"sku":"SC1176","price":17.25,"currency_code":"USD","in_stock":false},{"title":"Pre-soldered headers","offer_id":67994073923689,"sku":"SC0721","price":20.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/1799__06010.1635188257__74143.1756619914.jpg?v=1794000259"},{"product_id":"raspberry-pi-zero-w","title":"Raspberry Pi Zero W","description":"\u003cp\u003eRaspberry Pi Zero W is one of the smallest Raspberry Pi boards, adding wireless LAN and Bluetooth to the original Pi Zero design. It's made for compact, low-cost projects that don't need a lot of processing power, with mini HDMI, USB On-The-Go and a camera connector on board. The 40-pin header pads are left empty, so you can solder on exactly the header you need.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBCM2835 processor clocked at 1GHz with 512MB RAM\u003c\/li\u003e\n\u003cli\u003e802.11b\/g\/n wireless LAN, Bluetooth 4.1 and Bluetooth Low Energy\u003c\/li\u003e\n\u003cli\u003eMini HDMI output and a USB On-The-Go port\u003c\/li\u003e\n\u003cli\u003ePowered over micro USB\u003c\/li\u003e\n\u003cli\u003eCSI camera connector for Raspberry Pi camera projects\u003c\/li\u003e\n\u003cli\u003eUnpopulated HAT-compatible 40-pin header, plus composite video and reset headers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Broadcom BCM2835 @ 1GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 512MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 802.11b\/g\/n Wi-Fi, Bluetooth 4.1, BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e Mini HDMI; composite video header\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB On-The-Go port; micro USB power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO:\u003c\/strong\u003e HAT-compatible 40-pin footprint (header not fitted)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eAdd a 40-pin header to use HATs, pHATs or jumper wires. You'll need a mini HDMI cable or adapter for a display and a USB OTG adapter for keyboards and other USB devices.\u003c\/p\u003e\u003cp\u003eCompare it with the other \u003ca href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi boards\u003c\/a\u003e we carry.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994073956457,"sku":"SC0020","price":17.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/api60n3ij__57512.1554989288__15438.1757239583.webp?v=1794000261"},{"product_id":"raspberry-pi-pico-2","title":"Raspberry Pi Pico 2","description":"\u003cp\u003eRaspberry Pi Pico 2 is a low-cost microcontroller board built on RP2350, Raspberry Pi's high-performance, security-focused chip. Compared with the original Pico it runs faster and doubles both the SRAM and the flash, yet keeps the same size, GPIO pinout and micro-USB connector, so your existing Pico add-ons and code carry over. Choose Pico 2 or the wireless Pico 2 W, each with or without pre-soldered headers.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePick dual Arm Cortex-M33 or dual Hazard3 RISC-V cores, both at 150MHz\u003c\/li\u003e\n\u003cli\u003e520KB on-chip SRAM and 4MB QSPI flash\u003c\/li\u003e\n\u003cli\u003e26 GPIO pins, three of them ADC-capable, plus 12 PIO state machines\u003c\/li\u003e\n\u003cli\u003eArm TrustZone security with signed boot, 8KB antifuse OTP, SHA-256 acceleration and a hardware TRNG\u003c\/li\u003e\n\u003cli\u003ePico 2 W adds 2.4GHz 802.11n Wi-Fi and Bluetooth 5.2\u003c\/li\u003e\n\u003cli\u003eProgram it in C\/C++ or MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 21 × 51mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCPU:\u003c\/strong\u003e Dual Arm Cortex-M33 or dual RISC-V Hazard3 @ 150MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 520KB SRAM, 4MB QSPI flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeripherals:\u003c\/strong\u003e 2 × UART, 2 × SPI, 2 × I2C, 24 × PWM channels, USB 1.1 host\/device\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e 1.8–5.5V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20°C to +85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Pico 2 until at least January 2040\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne Pico 2 or Pico 2 W board (headers fitted if you chose that option)\u003c\/li\u003e\n\u003cli\u003eMicro-USB cable sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTry a first project: \u003ca href=\"\/blogs\/tutorials\/raspberry-pi-pico-neopixel-ring\"\u003edrive a NeoPixel ring with Pico\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico 2","offer_id":67994073989225,"sku":"SC1631","price":5.0,"currency_code":"USD","in_stock":false},{"title":"Pico 2 with headers","offer_id":67994074021993,"sku":"SC1632","price":6.0,"currency_code":"USD","in_stock":false},{"title":"Pico 2 W","offer_id":67994074054761,"sku":"SC1633","price":7.0,"currency_code":"USD","in_stock":false},{"title":"Pico 2 W with headers","offer_id":67994074087529,"sku":"SC1634","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/Pico_2__77534__77308.1756196295.jpg?v=1794000263"},{"product_id":"raspberry-pi-pico","title":"Raspberry Pi Pico","description":"\u003cp\u003eRaspberry Pi Pico is the original Pico 1 series: tiny, fast and versatile microcontroller boards built around RP2040, the flagship microcontroller chip designed by Raspberry Pi. A Pico is a low-cost way to get into microcontroller programming and hardware projects. Three versions are offered here: the standard Pico, the wireless Pico W, and the Pico WH, which is a Pico W with headers already fitted.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt on Raspberry Pi's own RP2040 microcontroller\u003c\/li\u003e\n\u003cli\u003eMicro-USB connector for both power and programming\u003c\/li\u003e\n\u003cli\u003ePico W and Pico WH add wireless connectivity\u003c\/li\u003e\n\u003cli\u003ePico WH comes with headers fitted, ready for a breadboard or jumper wires\u003c\/li\u003e\n\u003cli\u003eSame footprint and GPIO pinout as Raspberry Pi Pico 2, so moving up later is easy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eThe Pico 1 series shares its form factor, GPIO pinout and micro-USB connector with Raspberry Pi Pico 2, which is software-compatible with these boards. Pico add-ons, cables and accessories work with either generation.\u003c\/p\u003e\u003cp\u003eGet moving with our tutorial on \u003ca href=\"\/blogs\/tutorials\/raspberry-pi-pico-servo-control\"\u003econtrolling a servo with Raspberry Pi Pico\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Pico","offer_id":67994074120297,"sku":"SC0915","price":3.95,"currency_code":"USD","in_stock":false},{"title":"Pico W","offer_id":67994074153065,"sku":"SC0918","price":6.0,"currency_code":"USD","in_stock":false},{"title":"Pico WH (headers)","offer_id":67994074185833,"sku":"SC0919","price":7.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/PICO_W_HERO_TRANSPARENT__26247.1756312120.webp?v=1794000264"},{"product_id":"compute-module-5","title":"Raspberry Pi Compute Module 5","description":"\u003cp\u003eRaspberry Pi Compute Module 5 (CM5) is a system-on-module that puts Raspberry Pi 5's hardware into a compact form factor for embedded products and custom carrier boards. It keeps the CM4 footprint and its two 100-pin high-density connectors while adding more I\/O. Choose a Lite version without eMMC (2GB, 4GB or 16GB RAM) or a wireless version with 4GB RAM and 64GB eMMC or 8GB RAM and 32GB eMMC.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBroadcom BCM2712 quad-core Arm Cortex-A76 at 2.4GHz\u003c\/li\u003e\n\u003cli\u003eLPDDR4-4267 SDRAM with ECC\u003c\/li\u003e\n\u003cli\u003eTwo HDMI 2.0 outputs, both able to run 4Kp60 at once\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet PHY, PCIe Gen 2 x1, two USB 3.0 and one USB 2.0\u003c\/li\u003e\n\u003cli\u003eUp to 30 GPIO at 1.8V or 3.3V, with UART, I2C, SPI, I2S, PWM and DPI options\u003c\/li\u003e\n\u003cli\u003eOptional certified radio: dual-band 802.11ac Wi-Fi and Bluetooth 5.0, onboard or external antenna\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule size:\u003c\/strong\u003e 55 × 40 × 4.7mm, 4 × M2.5 mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 2 × 100-pin high-density\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera\/display:\u003c\/strong\u003e 2 × 4-lane MIPI, DSI or CSI-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultimedia:\u003c\/strong\u003e 4Kp60 HEVC decode, OpenGL ES 3.1, Vulkan 1.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e Single +5V, USB PD up to 5A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20°C to +85°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eRaspberry Pi makes a matching CM5 IO Board, IO Case, passive cooler and CM4\/5 antenna kit for development.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"2GB Lite","offer_id":67994074218601,"sku":null,"price":67.5,"currency_code":"USD","in_stock":false},{"title":"4GB Lite","offer_id":67994074251369,"sku":null,"price":100.0,"currency_code":"USD","in_stock":false},{"title":"Wireless 4GB \/ 64GB eMMC","offer_id":67994074284137,"sku":"SC1596","price":140.0,"currency_code":"USD","in_stock":false},{"title":"Wireless 8GB \/ 32GB eMMC","offer_id":67994074316905,"sku":"SC1601","price":205.0,"currency_code":"USD","in_stock":false},{"title":"16GB Lite","offer_id":67994074349673,"sku":null,"price":375.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/CM5-Hero_Final__79883.1732560704.webp?v=1794000268"},{"product_id":"cm5-dev-kit","title":"Raspberry Pi Development Kit for Compute Module 5","description":"\u003cp\u003eThe Raspberry Pi Development Kit for Compute Module 5 puts a CM5, the CM5 IO Board and the essential accessories in one box, so you can start prototyping an embedded product straight away. It's aimed at engineers and makers who want to evaluate Compute Module 5 on a complete, working setup before designing their own carrier board. Everything here is official Raspberry Pi hardware.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWireless-enabled Compute Module 5 with 4GB RAM and 32GB eMMC\u003c\/li\u003e\n\u003cli\u003eCM5 IO Board that breaks the module's interfaces out to standard connectors\u003c\/li\u003e\n\u003cli\u003eIO Case and passive cooler for a finished, cooled enclosure\u003c\/li\u003e\n\u003cli\u003e27W USB-C power supply to run the whole setup\u003c\/li\u003e\n\u003cli\u003eAntenna kit plus HDMI and USB cables included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 (4GB RAM, 32GB eMMC, wireless)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 IO Board\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 IO Case\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi 27W USB-C Power Supply\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 Passive Cooler\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Compute Module 4\/5 Antenna Kit\u003c\/li\u003e\n\u003cli\u003e2 × Raspberry Pi HDMI to HDMI cables (full-size)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi USB-A to USB-C cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSee the full \u003ca href=\"\/collections\/official-raspberry-pi\"\u003eofficial Raspberry Pi range\u003c\/a\u003e for spare modules and accessories.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994074382441,"sku":"SC1754","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/2196_Final__93977.1732646137__01106.1756892143.webp?v=1794000269"},{"product_id":"compute-module-5-io-board","title":"Raspberry Pi Compute Module 5 IO Board","description":"\u003cp\u003eThe Raspberry Pi Compute Module 5 IO Board is a carrier board that breaks out every CM5 interface to the standard connectors used on Raspberry Pi 5, with full-size HDMI in place of micro HDMI. Use it to develop and test a CM5-based product, or as an alternative Raspberry Pi form factor for industrial jobs. The design is available as a KiCad reference design.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAccepts every Compute Module 5 variant\u003c\/li\u003e\n\u003cli\u003eTwo full-size HDMI 2.0 connectors\u003c\/li\u003e\n\u003cli\u003eM.2 M key PCIe socket\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet with PoE+ HAT+ support, two USB 3 sockets and a standard 40-pin GPIO header\u003c\/li\u003e\n\u003cli\u003ePower button to wake and shut down CM5, plus a CR2032 socket for the RTC\u003c\/li\u003e\n\u003cli\u003eREV2 board with improved fan control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 160 × 90mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e microSD socket for CM5 Lite modules\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay\/camera:\u003c\/strong\u003e 2 × MIPI DSI\/CSI-2 FPC connectors (22-pin, 0.5mm pitch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion:\u003c\/strong\u003e Raspberry Pi HAT+ connector, 4-pin fan connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e External 5V USB-C supply (27W recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 IO Board (REV2)\u003c\/li\u003e\n\u003cli\u003eCompute Module 5 and case sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eFits all Compute Module 5 modules. Raspberry Pi offers an optional CM5 IO Case to house it.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994074415209,"sku":"SC1751","price":26.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/CM5-IO_Board_REV2-SC1967webp__60481.1752220989.webp?v=1794000271"},{"product_id":"raspberry-pi-debug-probe","title":"Raspberry Pi Debug Probe","description":"\u003cp\u003eThe Raspberry Pi Debug Probe is a small USB debug kit for Raspberry Pi Pico and other boards, with all the cables you need for solderless, plug-and-play debugging. It gives you an Arm Serial Wire Debug interface and a UART bridge over a single USB connection, and works from Windows, Mac or Linux hosts.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBased on RP2040 and running the open-source Picoprobe firmware\u003c\/li\u003e\n\u003cli\u003eFirmware updates the same way as a Pico, or load your own\u003c\/li\u003e\n\u003cli\u003eStandard CMSIS-DAP interface, so it works with OpenOCD and other CMSIS-DAP tools\u003c\/li\u003e\n\u003cli\u003eDoubles as an inexpensive USB-to-UART cable for any board\u003c\/li\u003e\n\u003cli\u003e3-pin JST-SH connectors that match Pico H, per Raspberry Pi's 3-pin debug connector spec\u003c\/li\u003e\n\u003cli\u003eCompact clear case and three cable styles included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e 22 × 32mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal I\/O voltage:\u003c\/strong\u003e 3.3V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20°C to +70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2028\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaspberry Pi Debug Probe in a clear case\u003c\/li\u003e\n\u003cli\u003eMicro-USB cable\u003c\/li\u003e\n\u003cli\u003eJST-SH 3-pin to JST-SH 3-pin cable\u003c\/li\u003e\n\u003cli\u003eJST-SH 3-pin to male jumper cable\u003c\/li\u003e\n\u003cli\u003eJST-SH 3-pin to female header cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eDesigned for Raspberry Pi Pico and RP2040 targets, and usable with other development boards through its CMSIS-DAP debug and UART interfaces.\u003c\/p\u003e\u003cp\u003eFind more bench gear in \u003ca href=\"\/collections\/prototyping-tools\"\u003eprototyping tools\u003c\/a\u003e.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994074447977,"sku":"SC0889","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/2035-2-1__24971.1757298721.webp?v=1794000273"},{"product_id":"radio-module-2","title":"Raspberry Pi Radio Module 2","description":"\u003cp\u003eRaspberry Pi Radio Module 2 (RM2) is a tiny Wi-Fi and Bluetooth module for adding wireless to your own PCB designs or OEM products. Based on the Infineon CYW43439 and originally designed for Raspberry Pi microcontrollers such as Pico 2 W, it uses castellated pads, has an onboard antenna and carries full modular certification to simplify compliance. Sold as a single module.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-band 2.4GHz Wi-Fi 4 (802.11n)\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.2, Classic and Low Energy\u003c\/li\u003e\n\u003cli\u003e21-pad castellated package with an onboard antenna shared by Wi-Fi and Bluetooth\u003c\/li\u003e\n\u003cli\u003eLow-pin-count qSPI host interface plus three host-controlled GPIOs\u003c\/li\u003e\n\u003cli\u003eFCC modular conformance\u003c\/li\u003e\n\u003cli\u003eFully software-compatible with the Pico W and Pico 2 W SDK\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e Infineon CYW43439\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi data rate:\u003c\/strong\u003e Up to 96Mbps PHY rate on 20MHz channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth range:\u003c\/strong\u003e Up to 100m (Class 1) or 10m (Class 2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 1.19mA power save, 43mA receive, 271mA transmit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 16.5 × 14.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -30°C to +70°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e RMC20452T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction lifetime:\u003c\/strong\u003e Until at least January 2036\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne Raspberry Pi Radio Module 2 in an anti-static bag\u003c\/li\u003e\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":67994074480745,"sku":"SC1169","price":4.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/RaspberryPi-SC1169-Radio_Module_2-Main__09263.1751281121.webp?v=1794000275"},{"product_id":"adafruit-circuit-playground-express","title":"Circuit Playground Express","description":"\u003cp\u003eCircuit Playground Express is a round, all-in-one microcontroller board from Adafruit with lights, sensors and buttons already on board, so your first hardware program can run before you have touched a single wire. It is a popular first board for classrooms and beginners: begin with MakeCode blocks, then move on to CircuitPython or the Arduino IDE on the same hardware.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 RGB NeoPixel LEDs, a speaker, a microphone, two push buttons and a slide switch\u003c\/li\u003e\n\u003cli\u003eMotion, temperature, light and sound sensors built in\u003c\/li\u003e\n\u003cli\u003eCapacitive touch pads and alligator-clip pads around the edge, so no soldering or sewing is needed\u003c\/li\u003e\n\u003cli\u003eBuilt-in USB: plug it in and it shows up on your computer, no special cable or adapter required\u003c\/li\u003e\n\u003cli\u003ePower it from USB, a AAA battery pack or a LiPo battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e ATSAMD21 ARM Cortex-M0+ with native USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDs:\u003c\/strong\u003e 10 RGB NeoPixels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensors:\u003c\/strong\u003e Motion, temperature, light, sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB, AAA battery pack or LiPo battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eMicrosoft MakeCode (blocks or JavaScript), CircuitPython, the Arduino IDE and code.org CS Discoveries in the browser.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit boards and add-ons\u003c\/a\u003e for your next project.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994092929129,"sku":"ADA3333","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/3333-00.jpg?v=1794001330"},{"product_id":"adafruit-circuit-playground-bluefruit-bluetooth-low-energy","title":"Circuit Playground Bluefruit - Bluetooth® Low Energy","description":"\u003cp\u003eCircuit Playground Bluefruit is the Bluetooth Low Energy member of the Circuit Playground family: the same friendly round board, now built around the more powerful Nordic nRF52840. Wireless links to phones, tablets and computers make it a good fit for wearables, classroom builds and wireless controllers.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003enRF52840 microcontroller with Bluetooth Low Energy and native USB\u003c\/li\u003e\n\u003cli\u003e10 RGB NeoPixels, a speaker, a microphone, two buttons and a slide switch\u003c\/li\u003e\n\u003cli\u003eAccelerometer plus temperature, light and sound sensors on board\u003c\/li\u003e\n\u003cli\u003eAlligator-clip pads around the edge, so no soldering or sewing is needed\u003c\/li\u003e\n\u003cli\u003ePlug it into USB to program it, then take it on the go\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Nordic nRF52840\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Bluetooth Low Energy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEDs:\u003c\/strong\u003e 10 RGB NeoPixels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e USB, AAA battery pack or LiPo battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython and the Arduino IDE. MakeCode is not supported on this board.\u003c\/p\u003e\u003cp\u003eNeed a board without Bluetooth? Compare it with the rest of our \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994092961897,"sku":"ADA4333","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4333-09.jpg?v=1794001333"},{"product_id":"adafruit-adafruit-feather-rp2040","title":"Adafruit Feather RP2040","description":"\u003cp\u003eThe Adafruit Feather RP2040 puts the Raspberry Pi RP2040 dual-core microcontroller into the Feather format, with everything you need to get from idea to working prototype quickly. Battery charging, a STEMMA QT port and plenty of flash make this RP2040 board a flexible base for portable and sensor projects. For many tasks it runs at close to the speed of an M4 board.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDrag-and-drop UF2 bootloader in permanent ROM: hold BOOTSEL while plugging in USB and the board appears as a drive\u003c\/li\u003e\n\u003cli\u003eSTEMMA QT \/ Qwiic connector for plug-in I2C sensors\u003c\/li\u003e\n\u003cli\u003eRGB NeoPixel status LED\u003c\/li\u003e\n\u003cli\u003eBuilt-in LiPo battery charging over USB-C\u003c\/li\u003e\n\u003cli\u003eFeather layout, so it stacks with FeatherWing add-ons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+ at 125 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 264 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB QSPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, STEMMA QT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e No hardware floating-point unit, so heavy float math runs in software\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, MicroPython, the Arduino IDE, the Pico SDK and FeatherWings.\u003c\/p\u003e\u003cp\u003eSee more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit Feather boards and add-ons\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994092994665,"sku":"ADA4884","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4884-04.jpg?v=1794001334"},{"product_id":"adafruit-adafruit-feather-m4-express-featuring-atsamd51","title":"Adafruit Feather M4 Express - Featuring ATSAMD51","description":"\u003cp\u003eThe Adafruit Feather M4 Express is a Feather board for projects that need processing headroom, such as audio, displays and math-heavy sensor work. Its ATSAMD51 Cortex-M4 adds a floating-point unit and generous memory in the familiar Feather footprint, and it arrives with CircuitPython installed. When you unplug it, your code goes with the board.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShips with CircuitPython: it mounts as a small USB drive, so you edit your code in any text editor\u003c\/li\u003e\n\u003cli\u003eNo software install needed, so it works on Chromebooks and locked-down computers\u003c\/li\u003e\n\u003cli\u003eNative USB, built-in LiPo charging and a NeoPixel status LED\u003c\/li\u003e\n\u003cli\u003eWorks with the full range of FeatherWing add-ons\u003c\/li\u003e\n\u003cli\u003eAlso programmable from the Arduino IDE for maximum speed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATSAMD51J19 Cortex-M4 at 120 MHz with floating point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal memory:\u003c\/strong\u003e 512 KB flash, 192 KB RAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra storage:\u003c\/strong\u003e 2 MB QSPI flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e Native USB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, the Arduino IDE and FeatherWings.\u003c\/p\u003e\u003cp\u003eBrowse the rest of our \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit boards\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093027433,"sku":"ADA3857","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/3857-05.jpg?v=1794001337"},{"product_id":"adafruit-adafruit-feather-nrf52840-express","title":"Adafruit Feather nRF52840 Express","description":"\u003cp\u003eThe Adafruit Feather nRF52840 Express combines Bluetooth Low Energy, native USB and battery charging on one Feather board. Reach for it when you are building a Bluetooth sensor node, a BLE gadget or anything that runs on a battery, and it works with both the Arduino IDE and CircuitPython. Compared with the earlier nRF52832 it has twice the flash and four times the SRAM.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840 Cortex-M4 with Bluetooth Low Energy\u003c\/li\u003e\n\u003cli\u003eNative USB, so it can run CircuitPython\u003c\/li\u003e\n\u003cli\u003eArduino IDE support that uses the Nordic SoftDevice radio stack for BLE\u003c\/li\u003e\n\u003cli\u003eSame API and peripherals as the nRF52832, so older nRF52832 projects need only a recompile\u003c\/li\u003e\n\u003cli\u003eBuilt-in LiPo charging and a NeoPixel status LED\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e Nordic nRF52840, Cortex-M4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 1 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 256 KB SRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Bluetooth Low Energy 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e Feather\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, the Arduino IDE and FeatherWings.\u003c\/p\u003e\u003cp\u003eFind more wireless boards in our \u003ca href=\"\/collections\/esp32-iot\"\u003eESP32 and IoT collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093060201,"sku":"ADA4062","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4062-00.jpg?v=1794001338"},{"product_id":"adafruit-adafruit-qt-py-rp2040","title":"Adafruit QT Py RP2040","description":"\u003cp\u003eThe Adafruit QT Py RP2040 is a thumbnail-sized development board built on the Raspberry Pi RP2040, the same chip used in the Pico and the larger Feather and ItsyBitsy RP2040. It is meant for very small projects where you still want real processing power, and its STEMMA QT port lets you add I2C sensors without soldering.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eVery small footprint for compact and wearable builds\u003c\/li\u003e\n\u003cli\u003eSTEMMA QT \/ Qwiic connector: a chainable I2C port for plug-in sensors and accessories\u003c\/li\u003e\n\u003cli\u003eUSB-C connector and an RGB NeoPixel\u003c\/li\u003e\n\u003cli\u003eCastellated pads, so it can be soldered flat onto another PCB or used on a breadboard\u003c\/li\u003e\n\u003cli\u003eDrag-and-drop programming: the RP2040 appears as a USB drive for new firmware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+ at 125 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, STEMMA QT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, MicroPython and the Arduino IDE.\u003c\/p\u003e\u003cp\u003ePair it with plug-in boards from our \u003ca href=\"\/collections\/sensors-modules\"\u003esensors and modules collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093092969,"sku":"ADA4900","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4900-11.jpg?v=1794001340"},{"product_id":"adafruit-adafruit-qt-py-esp32-s3-wifi-dev-board-with-stemma-qt","title":"Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT","description":"\u003cp\u003eThe Adafruit QT Py ESP32-S3 brings Espressif's ESP32-S3 to the thumbnail-sized QT Py format. With dual 240 MHz cores, Wi-Fi, Bluetooth LE and native USB, this ESP32-S3 board is well suited to compact Wi-Fi sensors, smart-home gadgets and IoT displays. Espressif designed the chip for IoT, wearable and smart-home applications, and its low power use helps in battery builds.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual-core 240 MHz ESP32-S3 with 2.4 GHz Wi-Fi and Bluetooth LE\u003c\/li\u003e\n\u003cli\u003eNative USB, so it can act as a keyboard or a disk drive with no USB-to-serial chip\u003c\/li\u003e\n\u003cli\u003e8 MB flash, a handy upgrade for existing ESP32 projects\u003c\/li\u003e\n\u003cli\u003eSTEMMA QT \/ Qwiic I2C port and RGB NeoPixel\u003c\/li\u003e\n\u003cli\u003eCompact, breadboard-friendly layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e Espressif ESP32-S3, dual-core 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi, Bluetooth LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, STEMMA QT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, the Arduino IDE, ESP-IDF and ESPHome.\u003c\/p\u003e\u003cp\u003eExplore more connected boards in our \u003ca href=\"\/collections\/esp32-iot\"\u003eESP32 and IoT collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093125737,"sku":"ADA5426","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5426-00.jpg?v=1794001342"},{"product_id":"adafruit-adafruit-qt-py-esp32-pico-wifi-dev-board-with-stemma-qt","title":"Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT","description":"\u003cp\u003eThe Adafruit QT Py ESP32 Pico is a thumbnail-sized ESP32 development board built around the ESP32-PICO-V3-02 module. It packs Wi-Fi, Bluetooth Classic and BLE into a tiny footprint, with USB-C and a STEMMA QT connector for quick wireless sensor projects. The 2 MB of PSRAM gives extra room for larger buffers and data.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eESP32-PICO-V3-02: dual-core 240 MHz Tensilica processor with crystal, flash, PSRAM and RF matching in one package\u003c\/li\u003e\n\u003cli\u003eWi-Fi plus Bluetooth Classic and BLE\u003c\/li\u003e\n\u003cli\u003eUSB-to-serial converter, USB-C connector and on-board antenna\u003c\/li\u003e\n\u003cli\u003eButtons, an RGB NeoPixel and a STEMMA QT \/ Qwiic I2C port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule:\u003c\/strong\u003e ESP32-PICO-V3-02 (ESP32 ECO V3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Dual-core 240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 8 MB flash, 2 MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e 2.4 GHz Wi-Fi, Bluetooth Classic and BLE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, STEMMA QT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eThe Arduino IDE, ESP-IDF and MicroPython.\u003c\/p\u003e\u003cp\u003eCompare it with other boards in our \u003ca href=\"\/collections\/esp32-iot\"\u003eESP32 and IoT collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093191273,"sku":"ADA5395","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5395-00.jpg?v=1794001344"},{"product_id":"adafruit-adafruit-itsybitsy-rp2040","title":"Adafruit ItsyBitsy RP2040","description":"\u003cp\u003eThe Adafruit ItsyBitsy RP2040 fits the Raspberry Pi RP2040 into the slim ItsyBitsy footprint: smaller than a Feather, with more pins than a QT Py. It is the same chip as the Feather RP2040 and Raspberry Pi Pico, so it is a natural next step when a finished prototype needs to shrink. Despite the size, it keeps plenty of pins and processing power for wearables and compact controllers.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual Cortex-M0+ processor at 125 MHz\u003c\/li\u003e\n\u003cli\u003e23 digital GPIO, of which 4 can be analog inputs and 16 can be PWM outputs\u003c\/li\u003e\n\u003cli\u003e5 V level-shifted output for driving NeoPixels\u003c\/li\u003e\n\u003cli\u003e8 MB SPI flash for code, file storage or data logging\u003c\/li\u003e\n\u003cli\u003eRGB status LED plus BOOTSEL and reset buttons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+ at 125 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory:\u003c\/strong\u003e 8 MB flash, 264 KB SRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins:\u003c\/strong\u003e 23 GPIO, 6 power pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1.4 x 0.7 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e Micro USB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, MicroPython and the Arduino IDE.\u003c\/p\u003e\u003cp\u003eAdd some light with our \u003ca href=\"\/collections\/leds-neopixels\"\u003eLEDs and NeoPixels\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093224041,"sku":"ADA4888","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4888-05.jpg?v=1794001346"},{"product_id":"adafruit-adafruit-metro-m4-express-airlift-wifi-lite","title":"Adafruit Metro M4 Express AirLift (WiFi) - Lite","description":"\u003cp\u003eThe Adafruit Metro M4 Express AirLift Lite is an Arduino Uno-shaped board that pairs a fast ATSAMD51 processor with an ESP32 Wi-Fi co-processor. Use your existing shields and add secure network connections to a project without a separate Wi-Fi module. With plenty of flash and RAM, your code has room to grow, and the fast processor keeps it responsive.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eATSAMD51J19 Cortex-M4 at 120 MHz with floating point support\u003c\/li\u003e\n\u003cli\u003eOn-board ESP32 Wi-Fi co-processor (AirLift) that handles TLS and sockets, with root certificates pre-loaded\u003c\/li\u003e\n\u003cli\u003eSame size as other Metro boards, with analog pins and SPI, UART and I2C in the familiar positions\u003c\/li\u003e\n\u003cli\u003eNative USB and 2 MB QSPI flash\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e ATSAMD51J19 Cortex-M4F, 120 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e ESP32 Wi-Fi co-processor with TLS\/SSL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e 2 MB QSPI flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e Metro (Arduino Uno shape)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, the Arduino IDE and Arduino shields.\u003c\/p\u003e\u003cp\u003eFind more connected boards in our \u003ca href=\"\/collections\/esp32-iot\"\u003eESP32 and IoT collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093289577,"sku":"ADA4000","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4000-08.jpg?v=1794001348"},{"product_id":"adafruit-adafruit-metro-rp2040","title":"Adafruit Metro RP2040","description":"\u003cp\u003eThe Adafruit Metro RP2040 puts the Raspberry Pi RP2040 into a classic Arduino-shaped board, adding the extra space, storage and debugging ports that a full-size development board allows. It is a good fit if you want shield compatibility or simply room to work. The swap switch is also handy if you often find you have wired RX and TX the wrong way round.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eArduino Uno-compatible shield layout\u003c\/li\u003e\n\u003cli\u003eRX\/TX switch: choose in-order GPIO numbering or the traditional Arduino positions for the hardware UART on D0 and D1\u003c\/li\u003e\n\u003cli\u003eSWD debug port, microSD card slot and STEMMA QT connector\u003c\/li\u003e\n\u003cli\u003eUSB-C with an RGB NeoPixel status LED\u003c\/li\u003e\n\u003cli\u003eClose to M4 speed for many tasks; no floating-point unit, so heavy float math runs in software\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAM:\u003c\/strong\u003e 264 KB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 16 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, SWD, microSD, STEMMA QT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython, MicroPython, the Arduino IDE and the Pico SDK.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit development boards\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093322345,"sku":"ADA5786","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5786-00.jpg?v=1794001350"},{"product_id":"adafruit-adafruit-pyportal-circuitpython-powered-internet-display","title":"Adafruit PyPortal - CircuitPython Powered Internet Display","description":"\u003cp\u003eThe Adafruit PyPortal packs a color touchscreen, Wi-Fi and a fast processor into one ready-made unit, so it works as a self-contained internet display. Write touchscreen interfaces in CircuitPython that pull data from web APIs, such as news, weather or stock prices, and build dashboards, smart-home controls or a connected badge.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.2 inch 320x240 color TFT with resistive touch\u003c\/li\u003e\n\u003cli\u003eATSAMD51J20 main processor with native USB: shows up as a drive and can act as a MIDI or HID keyboard\/mouse\u003c\/li\u003e\n\u003cli\u003eESP32 Wi-Fi co-processor handles TLS\/SSL and socket buffering, leaving the SAMD51 free for the interface\u003c\/li\u003e\n\u003cli\u003eSpeaker, light sensor and microSD card slot\u003c\/li\u003e\n\u003cli\u003eSTEMMA ports for adding sensors\u003c\/li\u003e\n\u003cli\u003eMay arrive with DigiKey and Analog Devices branding or in plain styling; the hardware is identical\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain processor:\u003c\/strong\u003e Microchip ATSAMD51J20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi:\u003c\/strong\u003e Espressif ESP32 co-processor with TLS\/SSL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 3.2 in, 320x240, resistive touch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther:\u003c\/strong\u003e DAC, ADC, PWM, GPIO\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython and the Arduino IDE.\u003c\/p\u003e\u003cp\u003eSee more screens in our \u003ca href=\"\/collections\/cameras-displays\"\u003ecameras and displays collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093355113,"sku":"ADA4116","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4116-00.jpg?v=1794001351"},{"product_id":"adafruit-adafruit-clue-nrf52840-express-with-bluetooth-le","title":"Adafruit CLUE - nRF52840 Express with Bluetooth® LE","description":"\u003cp\u003eThe Adafruit CLUE combines a color screen, Bluetooth LE and a long list of sensors on a board that matches the BBC micro:bit in outline. Its matching edge connector with five large pads lets it slot into many existing micro:bit robot kits and add-ons. Underneath, the electronics are a completely new design, aimed at projects that need a small screen and lots of sensors.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNordic nRF52840 with Bluetooth LE and native USB\u003c\/li\u003e\n\u003cli\u003e1.3 inch 240x240 color IPS display and two buttons\u003c\/li\u003e\n\u003cli\u003e9-DoF motion sensing plus proximity, light, color, gesture, humidity, pressure and sound sensors\u003c\/li\u003e\n\u003cli\u003emicro:bit-compatible edge connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e Nordic nRF52840\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 1.3 in 240x240 IPS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless:\u003c\/strong\u003e Bluetooth LE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython and the Arduino IDE. MakeCode and Scratch are not supported. Most micro:bit cases will not fit, and micro:bit code may need changes to run.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit boards\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093387881,"sku":"ADA4500","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/4500-08.jpg?v=1794001354"},{"product_id":"adafruit-adafruit-kb2040-rp2040-kee-boar-driver","title":"Adafruit KB2040 - RP2040 Kee Boar Driver","description":"\u003cp\u003eThe Adafruit KB2040 puts an RP2040 on a board that copies the shape and pinout of the Arduino Pro Micro, designed as a drop-in controller for custom mechanical keyboard PCBs. It is also a handy base for macro pads and other compact USB devices. The RP2040 is powerful and low-cost, which makes it a good keyboard driver chip, and it works with the CircuitPython-based KMK firmware.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePro Micro-compatible footprint for keyboard PCBs\u003c\/li\u003e\n\u003cli\u003eSTEMMA QT \/ Qwiic I2C port on the end of the board\u003c\/li\u003e\n\u003cli\u003eCastellated pads, including pads for USB D+ and D-\u003c\/li\u003e\n\u003cli\u003eBoot button doubles as a user button, plus an onboard NeoPixel\u003c\/li\u003e\n\u003cli\u003eJumper to bypass the diode and fuse for high-power RGB LEDs or USB hosting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB QSPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e USB-C, STEMMA QT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eKMK and CircuitPython, QMK and the Arduino IDE.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit boards\u003c\/a\u003e for your build.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994093420649,"sku":"ADA5302","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5302-07.jpg?v=1794001355"},{"product_id":"adafruit-adafruit-feather-rp2040-with-usb-type-a-host","title":"Adafruit Feather RP2040 with USB Type A Host","description":"\u003cp\u003eThe Adafruit Feather RP2040 with USB Type A Host adds a second USB port to the Feather RP2040: a standard USB Type A socket that works as a USB host. Connect keyboards, MIDI controllers, game pads and other USB devices while keeping the USB-C port free for uploading code and debugging. It is a firmware-based approach, but it handles most USB devices about as well as a typical hardware USB host.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUSB Type A host port driven by the RP2040 PIO peripheral\u003c\/li\u003e\n\u003cli\u003eSeparate USB-C port for programming and data\u003c\/li\u003e\n\u003cli\u003eSTEMMA QT \/ Qwiic I2C connector and a NeoPixel\u003c\/li\u003e\n\u003cli\u003eBuilt-in LiPo charging and the standard Feather layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040 dual-core Cortex-M0+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C (device) and USB Type A (host)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e USB host uses the second core and one full PIO peripheral\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython and the Arduino IDE. The PIO USB host code is based on work by sekigon, which remains the recommended library for the Pico SDK.\u003c\/p\u003e\u003cp\u003eSee more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit Feather boards\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994095779945,"sku":"ADA5723","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5723-00.jpg?v=1794001357"},{"product_id":"adafruit-adafruit-macropad-rp2040-starter-kit-3x4-keys-encoder-oled","title":"Adafruit MacroPad RP2040 Starter Kit - 3x4 Keys + Encoder + OLED","description":"\u003cp\u003eThe Adafruit MacroPad RP2040 Starter Kit is a complete 12-key macro keypad with a rotary encoder, an OLED display and RGB lighting under every key. Snap the switches in, then code your own keyboard shortcuts, MIDI controls or gaming macros with CircuitPython or Arduino. This is the full kit with switches, keycaps and an enclosure; if you prefer to choose your own keys and caps, the parts are also sold separately.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x4 key layout; each socket accepts a Cherry MX-compatible switch, no soldering needed\u003c\/li\u003e\n\u003cli\u003eNeoPixel RGB LED for each key\u003c\/li\u003e\n\u003cli\u003eRotary encoder with push switch\u003c\/li\u003e\n\u003cli\u003e128x64 OLED display and a speaker\u003c\/li\u003e\n\u003cli\u003eRP2040 microcontroller with 8 MB flash\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocontroller:\u003c\/strong\u003e RP2040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash:\u003c\/strong\u003e 8 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeys:\u003c\/strong\u003e 12 (3x4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128x64 OLED\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMacroPad RP2040 board\u003c\/li\u003e\n\u003cli\u003eKey switches\u003c\/li\u003e\n\u003cli\u003eKeycaps\u003c\/li\u003e\n\u003cli\u003eEnclosure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cp\u003eCircuitPython and the Arduino IDE.\u003c\/p\u003e\u003cp\u003eBrowse more \u003ca href=\"\/collections\/adafruit\"\u003eAdafruit kits and boards\u003c\/a\u003e.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":67994095812713,"sku":"ADA5128","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1537\/4185\/files\/5128-01.jpg?v=1794001360"}],"url":"https:\/\/makersthings.com\/collections\/boards.oembed?page=2","provider":"maker's things","version":"1.0","type":"link"}